Faculty Publications

Feasibility Of Us Foundry Supply Chain Consumables For Three Dimensional Sand Printing

Document Type

Conference

Keywords

Furan, Printed density, Scratch hardness, Silica, Tensile strength, Three-dimensional printed sand

Journal/Book/Conference Title

73rd World Foundry Congress "Creative Foundry", WFC 2018 - Proceedings

First Page

235

Last Page

236

Abstract

The purpose of this study was to assess the performance characteristics of commercially available US foundry consumables for use in three-dimensional sand printers. The silica sands selected were a 57-grain fineness number (GFN) and 70 GFN. These sands were a high purity round grain silica and had low trace contaminates, to reduce any possible influence from contaminates. The Furan resin system was selected since it is the most widely utilized resin system for 3D printed sand (3DPS) in the USA. The Furan resin system was from a domestic US foundry supplier. The printed samples were traditional tensile specimen and rectangle samples for the determination of density. The samples were examined for the following properties: tensile strength, loss on ignition, density, scratch hardness, and permeability. The results of this investigation confirmed that the tested domestic resin system and silica sands matched the original equipment manufacturer performance properties.

Original Publication Date

1-1-2018

Repository

UNI ScholarWorks, Rod Library, University of Northern Iowa

Language

en

This document is currently not available here.

Comments?

Share

COinS